meeting diverse client requirements across diverse sectors
bringing a world of protection
We also provide protective solutions by collaborating with renowned international brands across the globe, such as Elcometer, Gardner Gibson, Potters and Rustoleum.
explore products
VersaFlex, USA
A fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomeric spray coating. Produces an ultra tough film at all thicknesses, will not hydrolyze, leach or contaminate other materials, and is bondable and paintable.
• Low permeation and excellent thermal stability
• Direct food contact approved
• 100% solids, no VOC’s
• Tough elastomeric membrane
• Minimal downtime
Typical Applications
It can be used in transitional areas along with interior or exterior applications. Below and above-grade waterproofing, water and wastewater treatment, food processing facilities, pulp and paper mills, parking garage decks, bottling and canning facilities.
Substrate: Concrete
Type of Product: Top Coat
Rust-Oleum, USA
A two-component, high solids epoxy coating for use in moderate to severe environments.
It is specifically designed for application directly on sound rusted steel with minimum surface preparation.
• Direct-to-metal
• Self-priming formula
• Excellent resistance – chemicals, abrasions, impact, and solvent
• Meets incidental food contact requirements
Typical Applications
It can be used on clean and sound rusted steel, concrete (including concrete floors), previously coated and slightly damp surfaces. It may also use for water immersion. Service, Chemical plants, steel structures, pre-treated buildings, pipes, etc.
Substrate: Concrete / Metal
Type of Product: Primer / Top Coat
KAN-Tar
High solid, polyamide-converted epoxy that includes refined coaltar pitch, which forms an extremely durable coating. It is recommended for both new construction and maintenance in moderate to severe chemical, marine, and atmospheric exposures.
• Excellent abrasive strength
• Strong chemical resistivity
• Water-resistant barrier
• Excellent corrosion resistance
• Self-priming high build coating
Typical Applications
Tubular steel pilings wharf structures, bridge undersides, and dams buried pipelines.
Substrate: Metal/Masonry
Type of Product: Top Coat
KAN-Cor
Based on unmodified chlorinated rubber resin. When used in combination with a suitable primer, the system exhibits exceptional water Impermeability, resistance to salt spray, spillage and fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.
• Excellent chemical resistance
• Single pack product
• Resistance to molds and fungal growth
• Recoatable
Typical Applications
Fertilizer plants, plating shops, paper mills, breweries, exterior coatings on chemical storage tanks, and in the mining industry.
Substrate: Concrete / Metal
Type of Product: Top Coat / Chlorinated Rubber
KAN-Tar
Based on unmodified chlorinated rubber resin. When used in combination with KAN-Cor CR finish, the coating system exhibits exceptional water impermeability, resistance to salt spray, spillage and fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.
• Excellent water impermeability
• Salt spray resistance
• Withstands fumes and splashes of most acids
• Resist alkalis and other chemicals
• Easy to recoat
Typical Applications
Concrete, plaster, and masonry surfaces, fertilizer plants, plating shops, and gas works.
Substrate: Concrete / Metal
Type of Product: Primer
KAN-Thor
This is a two component amine cured epoxy coating. It is a high build product, designed to improve barrier protection as a midcoat (intermediate) / topcoat for systems with various atmospheric conditions. It can also be used as a liner for the storage of various products.
• High Build
• Strong chemical resistivity
• High abrasion resistant
Typical Applications
Steel structures, inner surfaces of storage tanks, and equipment in chemical exposure.
Substrate: Metal
Type of Product: Intermediate Coat and Liners (Amine Cured)
KAN-Etch
A two-pack polyvinyl butyl based primer which contains zinc tetroxide chromate as the passivation pigment. It is recommended as an adhesion-inducing primer for use on non-ferrous metals.
• Simple mixing ratio 1:1
• Good adhesion – minimum surface preparation Matt finish
• Non-toxic
Typical Applications
Corrugated sheets makeshift shelters and steel structures.
Substrate: Galvanized Metal / Aluminium
Type of Product: Primer for Non-FerrousMetals
KAN-Therma
A two-component moisture-cured primer recommended for use as a primer coat underneath specified topcoats in the most aggressive industrial and marine environments.
• Excellent heat resistant property
• Good resistance to abrasion
• Weather-resistant
• Good resistance to moisture
• Easy application
• Temperature resistance 400-C
Typical Applications
Bridge structures and exteriors of petroleum storage tanks, marine installations, offshore platforms, and high-temperature environments.
Substrate: Metal
Type of Product: Primer / Inorganic Silicate
KAN-Therma
A single pack heat-resistant general-purpose finish—pigmented with or without aluminium flake. Designed to be a heat resistant coating for primed steel structure subject to temperature up to 200°C.
• Excellent heat resistant property
• Good resistance to abrasion
• Weather-resistant
• Good resistance to moisture
• Easy Application
Typical Applications
Tank farms, muffles, chimneys, and general structural steelwork pipelines where there is a high-temperature work environment.
Substrate: Metal
Type of Product: Top Coat (High Heat Resistant)
KAN-Therma
A metallic flake-filled finish based on a highly durable silicone medium designed to give excellent resistance to heat and weathering. The finish also provides maximum brilliance and reflective properties.
• High heat resistance
• Anti-corrosive
• Silicone-based
Typical Applications
Tank farms, muffles, chimneys, and general structural steelwork pipelines where there is a high-temperature work environment.
Substrate: Metal, Galvanized steel
Type of Product: Top Coat (Silicon)
KAN-Therma
A metallic flake-filled finish based on a highly durable silicone medium designed to give excellent resistance to heat and weathering. The finish also provides maximum brilliance and reflective properties.
• Good moisture resistance
• Anti-corrosive properties
• Excellent Weatherability
• Reflective properties
• High heat resistance
Typical Applications
Tank farms, muffles, chimneys, and general structural steelwork pipelines where there is a high-temperature work-environment severe condition.
Substrate: Metal / Galvanized Steel
Type of Product: Top Coat (Silicone-Based)
KAN-Therma
A two-pack product based on graphite, incorporating zinc dust. It is designed for steel surfaces operating in the temperature range from 150oC – to 450oC.
• Excellent weatherability
• Resists rain and condensation
• Fair resistance to aliphatic solvents
• Non-toxic dry film
Typical Applications
Tank farms, muffles, chimneys, and general structural steelwork pipelines where there is a high-temperature work environment.
Substrate: Metal
Type of Product: Top Coat
KAN-Taurus
An original and versatile, high build, two component epoxy maintenance coating for machinery, steel structures, and marine installations.
• Moderate chemical resistivity
• Excellent abrasion
• Resistivity high build
Typical Applications
MS structure and tank, fertilizer plants, chemical units, refineries, petrochemicals, etc.
Substrate: Metal
Type of Product: Top Coat
KAN-Taurus
Hi-build two components general-purpose industrial primer that contains Zinc Phosphate for corrosion inhibition. It is recommended as the standard heavy-duty primer for suitably prepared steel surfaces.
• Non-toxic
• Strong corrosion resistivity
• Excellent chemical resistance
• Solvent resistant
• Hi-Build
Typical Applications
General maintenance tank, storage facilities, cranes, and process plants.
Substrate: Metal
Type of Product: Primer / Epoxy
KAN-Taurus
A two-component polyamide cured epoxy coating with Micaceous Iron Oxide pigmentation. It displays outstanding durability and abrasion resistance and is used as an intermediate coat in many coating systems.
• Hi-build
• Resists early scale UV degradation
• High Abrasion resistance
• Excellent water/saltwater resistance
Typical Applications
Steel structures, wharf super-structures, high transmission towers, ship loaders, hoppers, conveyors, silos and storage tanks and other marine structures.
Substrate: Metal
Type of Product: Intermediate Coat
Rust-Oleum, USA
A single component, rust preventative water-based acrylic elastomeric coating. This self-priming, high build coating is designed for minimally prepared sound rusted or clean steel in mild to moderate industrial environments.
• High-performance product
• Self-Priming
• Unrivalled corrosion protection
• 200% elasticity
• Protects against cracking & peeling
• UV resistant
• Fulfils the requirement for corrosively class C5 (M) high as defined by ISO standard 12944
Typical Applications
Iron, steel, special alloys, galvanized and metalized iron, and steel.
Substrate: Concrete / Metal
Type of Product: Primer / Top Coat
KAN-Supra
Good chemical resistance and particularly suitable for surfaces where high durability is required. It is a versatile coating with excellent gloss retention and UV resistance.
• Excellent weatherability
• Easy application
• Excellent gloss and colour retention
• UV resistant
• Tough and abrasion-resistant
• Good chemical resistivity and durability
Typical Applications
Offshore structures, chemical and petrochemical plants, and bridges.
Substrate: Metal / Wood / Concrete / Plastic
Type of Product: Top Coat (Gloss, Satin, Matt)
KAN-Alko
An alkyd-based primer is used for the protection of prepared steel surfaces in mild industrial or commercial environments.
• Matt finish
• Single component
• Fast dry
• Anti-corrosive properties
Typical Applications
Structural steel, piping, cranes, building frames, bridges, towers, and tanks. It is also used in pulp and paper mills, the power industry as well as prefabricated structures and roofing.
Substrate: Metal
Type of Product: Primer (Alkyd Systems)
KAN-Alko
Synthetic Enamel is a tough, enamelled gloss finish based on durable alkyd resins and provides good durability and weathering resistance in mild industrial environments.
• Good weatherability
• Attractive glossy finish
• Anti-corrosion properties
• Multiple colour options For Interior / Exterior use
Typical Applications: General maintenance
Substrate: Metal/Wood
Type of Product: Top Coat / Alkyd based
A pigmented solvent-based acrylic concrete coating. Formulated using proven methacrylate resins. Provides long-term protection against corrosion and staining of carbonation for: concrete, masonry, and brickwork.
• Excellent alkali and fungal resistance
• Excellent adhesion for concrete & masonry
• UV resistant
• Excellent weather ability
• Excellent performance on old and new painted surfaces
• Excellent Anti-Carbonation properties for reinforcing concrete
Typical Applications
Where new and existing concrete and masonry structures require protection. For example; car parks, commercial and industrial buildings, bridges, subways, high-rise flats, roofing.
VersaFlex, USA
A fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomeric spray coating. Produces an extremely tough film at all thicknesses, will not hydrolyze, leach or contaminate other materials, and is bondable and paintable.
• Low permeation & excellent thermal stability
• Direct food contact approved
• 100% solids, no VOC’s
• Tough elastomeric membrane
• Minimal downtime
Typical Applications
Where new and existing concrete and masonry structures require protection. For example; car parks, commercial and industrial buildings, bridges, subways, high-rise flats, roofing.
Based on unmodified chlorinated rubber resin. When used in combination with Kan-Cor primer, the system exhibits: exceptional water impermeability, resistance to salt spray, spillage and fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.
• Excellent chemical resistance
• Single pack product
• Resistance to molds and fungal growth
• Recoatable
Typical Applications
Fertilizer plants, plating shops, paper mills, breweries, mines, and exterior coatings on chemical storage tanks.
KAN-Cor
Based on unmodified chlorinated rubber resin. When used in combination with KAN-Cor CR finish, the coating system exhibits: exceptional water impermeability, resistance to salt spray, spillage and fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.
• Excellent water impermeability
• Salt spray resistance
• Withstands fumes and splashes of most acids
• Resist alkalis and other chemicals
• Easy to recoat
Typical Applications
Concrete, plaster, and masonry surfaces, fertilizer plants, plating shops, and gas works.
KAN-Mark
A alkyd modified chlorinated rubber resin. It is most suitable for concrete and bitumen surfaces, providing high visibility and clean lines—without bleeding or discolouring.
• Durable
• Fast drying
• No bleeding
• No discoloration
• Single pack
Typical Applications
Curb stones, roads, and pavements.
Kaizen Paint
A two-component polyurea elastomer designed to be durable in a wide range of environments. Produces an ultra tough film at all thicknesses. It is a super coating designed specifically to receive a constant or intermittent attack from contained materials and abrasive action.
• Fast set and rapid curing
• 100% solids and flexible
• Waterproofing
• Odourless–no VOC
• Direct food contact approved
• Installation temperatures from – 28.9°C to +148.9°C
• Fast return to service
Typical Applications
Chemical plants, food processing facilities, tank linings.
Rust-Oleum, USA
A single component, rust preventative water-based acrylic elastomeric coating. This self-priming, high build coating is designed for minimally prepared sound rusted or clean steel in mild to moderate industrial environments.
• High-performance product
• Self-Priming
• Unrivalled corrosion protection
• 200% elasticity
• Protects against cracking & peeling
• UV resistant
• Fulfils the requirement for corrosively class C5 (M) high as defined by • ISO standard 12944
Typical Applications
Iron, steel, special alloys, galvanized and metalized iron and steel.
KAN-Krete
A high-performance, self-levelling epoxy and solvent-free floor coating.
• Chemical and moisture resistant
• Excellent abrasion resistance
• High build
• High solids
• Easy to apply
• Seamless finish
• Two-pack
Typical Applications
Electric plants, food processing plants, hospitals, pharmaceutical plants, laboratories, corridors, public housing and buildings, OEM plants, and showrooms.
KAN-Mark
A premium product for road safety markings, producing an audible warning to any motorist when trafficked upon.
• High Retro-reflectivity
• Excellent weatherability
• Excellent durability and adhesion
• High visibility
• Conforms to “BS” specifications, 3262: Part 1/1989
Typical Applications
Roads, pavements, runways and airfields.
Versaflex, USA
A combination of Viton and PTFE, offering outstanding chemical, temperature, and permeation resistance. Designed for use in severe-duty environments subject to chemical and heat exposures.
• Excellent resistance to most harsh chemical environments.
• Continuous operating temperature from -40°C to +200°C
• 250% elongation
• Very low coating permeability
• Excellent weather and UV resistance
Typical Applications
Chemical factories, Laboratories, gas stations, etc.
KAN-Alko
A fast-drying alkyd primer containing zinc phosphate as an anti-corrosive pigment. Used for the protection of structural steel in mild industrial and commercial environments.
• Non-toxic
• Air-dry coating
• Anti-corrosive
• Lead-free primer
• Easy Application
Typical Applications
Structural steel, beams, plates, pre-fabricated structures, building frames, bridges, towers and tanks, impermeability, salt solutions, alkalis, bleaching agents, and corrosive gases.
Innovating unique products which respond to troublesome commercial problems is in our DNA. In response to fire prevention product requests we offer a range of proven intumescent coatings to protect cables, concrete, steel and wood.
Maintaining the structural integrity of any building is a vital component. We have created a coating solution which helps to prevent the effects of weathering - such as water seepage and cooling down roof temperature.
A range of specialist aerosol products with unique functional benefits—critical for the maintenance of industrial buildings and equipment. Our products help reduce downtime, maintenance costs and unanticipated shutdowns.
Created for use during the construction process—a one-stop range of essential components: admixtures, flooring, grouts, repair mortars and waterproofing. All essential for construction industry projects from residential, commercial and industrial to infrastructure.
With a vision of modernising Pakistan’s road safety for today and for tomorrow, we have innovated a complete product range to improve road marking visibility and durability, including: dividers, glass beads, pavement markings, reflectors, and road studs. We have an in-house application team to support our customers.
We are the exclusive distribution partner of Elco-meter, throughout Pakistan. For more than seventy years, Elco-meter has been a world-leader in the design, manufacture, and supply of inspection equipment for the coatings, concrete, and metal detection industries.
application services
In Engineering coatings, we are the only company to offer end-to-end paint application services in Pakistan. Our skilled team comprises trained painters, helpers and certified riggers, civil and mechanical engineers, quality assurance specialists, and health & safety experts. Together they contribute to delivering peerless service experience to our clients.
The applied techniques and the expertise involved in handling the variety of sophisticated machinery owned by Kaizen Paint and operated by Kaizen Paint’s Service Team brings additional value to this service offer.
Elco-Meter
For more than seventy years, Elco-meter has been a world-leader in the design, manufacture, and supply of inspection equipment for the coatings, concrete, and metal detection industries. Their range of products is specifically developed to meet the needs of the coating industry, worldwide.
why Elco-Meter is unique?
Data management software can link with gauges to produce professional reports, generate .PDF reports; combine inspection data to share via email or cloud—in one click. Measurements can be displayed on an image or drawing and on charts too. Reports can be personalised by easily adding photos and notes.
All gauges come with a warranty period of 365 days (a warranty extension of up to two years is also available on selected items). All Elco-meter products are designed to comply with a most National and International Standards.
Kaizen Paint’s exclusive distribution offers inspection equipment, coating inspection, blast, spray, NDT, and concrete inspection.
